Model Rocketry is a fun and safe family activity.
model rocketry is a science your results may vary depending on how you build the rocket. please read the National Association of Rocketry model rocketry safety code and the model rocket handbook.
My Instructions are meant as a guide and are not a guarantee of stability or function of the product.
This rocket has been tested and proven but your results may be different.
depending on your skills.
Launching rockets can be dangerous and requires adult supervision. you use our products at your own risk. OLLIE-OOP Model Rocketry is not responsible for any damages or injuries incurred from use or misuse of our products. you are responsible for the Contruction and stability of your rocket. please follow all safety codes and launch procedures as stated by the NAR handbook.
our kits are not intended to be modified. Please use the recommended engines.
Always follow the NAR safety code at www.nar.com
Read all steps before beginning. Always dry fit the parts on every step that requires glue. And always add a reinforcing bead of glue to all joints the required glue and wipe off excess glue with your finger. Unless stated otherwise.
Always wear safety glasses and mask when cutting with a knife, saw, drill, rotary tool or when sanding or using powder.
NOTE
The tab on the trailing edge may need a little sanding to adjust the fit.
they should point straight just like vertical stabilizer.
I used a black paint marker to color in some areas.
Comments